Attention To The Rolling Machine Of Instant Noodle Production Line
Rolling machine is used to process the dough in noodle production line. Cause the machine has no added lubricating oil before delivery, it must be check the each parts of machine are smoothly or not and adding the lubricating oil before installation the noodle line. You need to check the each screw bolt, gear, chain are loose or not, and whether the gear teeth are closed or not after 10 minutes. Please noted, in that time the machine need to without anything. The tightness of chain is generally 3mm or so.
When you using the rolling machine of instant noodle making equipment, please attention to the following problem.
1. The whole instant noodle making machine before the factory has been tested qualified, if it is loose in the course of handling, you can adjust the machine according to manual diagram. as in the handling process loose.
2. The quality of noodles depends on the flour quality, Therefore, when mixing flour, we should pay attention to the proper addition of water. In generally, adding 28% water in winter and 25% water in summer, mixing time of flour is about 10 minutes.
3. It is strictly prohibited to appear iron or hard impurities in flour. Which in order to avoid to damage the parts of noodle machine.
4. If you found the dough sheet was attached the roller cutter, please check the cutter is loose or not, maybe is the screw bolt is loose that will cause this problem, you just need to tighten it.
Broadyea is specialized in automatic noodle making machine, which has more than thirty years experience in making noodle production line. Any question of noodle production equipment please feel free to contact us.